Date: Mon, 5 Jul 1999 21:56:53 -0700
Reply-To: Davidson <wdavidson@THEGRID.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Davidson <wdavidson@THEGRID.NET>
Subject: Re: fridge fan fuse
Content-Type: text/plain; charset="iso-8859-1"
David & Dave,
My stock fan was a new replacement from Dometic Dealer/Service Shop.
It was identical and new. It definitely tested at 220ma (though the Dometic
RM182B owner's manual claims .6 watts on page 7.) I bench tested it so it
definitely was not jammed. Also, the fridgemate definitely tested at 65ma
and blew LESS air than the stock fan. I tested these things pretty
thoroughly. I guess there could be some variation, but I'm sure that's what
my fans tested at.
I'll repost my fridge fan article for those who are interested.
Regarding the pulling the fan fuse, I'm pretty sure he was pulling it while
the fridge was off/not running. His problem it seems is that the fan runs
while his van is sitting stored in his garage... fridge not on. The fans is
activated by a heat switch that has noting to do with the fridge being on or
not; just the temp of the fins. However, my 90 Owners manual claims that
they come on at 126 F and turn off at 108 F (p. 7). This means they will
come on during a hot day even with the fridge off.
Bill
90 Westy Syncro
-----Original Message-----
From: David Beierl <synergx@ibm.net>
To: Davidson <wdavidson@THEGRID.NET>
Cc: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Monday, July 05, 1999 9:11 PM
Subject: Re: fridge fan fuse
>At 20:46 7/5/99 -0700, Davidson wrote:
>>I tested the stock Dometic fan at 220mv.
>
>Bill, the fan in the RM182B is rated at 0.7 watts, or 58 milliamps. That's
>also what mine measured several years ago. That would cut the consumption
>down to just under 1.5 amp-hours per 24 hours, or about 10 amp-hours per
>week, run continuously (3 1/3 AH at 8 hours/day). If yours is actually
>drawing 220 ma, I wonder if it's jammed or internally shorted, or not the
>original fan. Mine croaked, btw, and I just replaced it with a Fridgemate
>fan that draws about 90 ma (and pumps more air). 200+ ma would be about
>right for a computer power-supply fan or similar...
>
>>Yes you can just pull the fuse behind the driver's seat. Shouldn't hurt a
>>thing.
>
>Are you sure? I don't have any specific knowledge, but that fan is set to
>come on when the ammonia-vapor cooling fins hit 140 degrees F. at the
>outside of the topmost fin (so the vapor would actually be quite a bit
>hotter than that, as the fins have a surprisingly small contact with the
>vapor tube). Disabling the fan will certainly make the refrigerator
>perform badly, but might it also damage the cooling system? I'm guessing
>it will not, but I have enough doubt to not want to risk it.
>
>regds
>david
>
>
>David Beierl - dbeierl@ibm.net
>
|