Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2024, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 3 Dec 2024 09:12:35 -0500
Reply-To:     Eric Caron <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ericcaron96@COMCAST.NET>
Subject:      Re: Archive or shocks
Comments: To: Mike Miller <mwmiller6@att.net>
In-Reply-To:  <89368787.5247168.1733200296438@mail.yahoo.com>
Content-Type: text/plain; charset=utf-8

Hi Mike,

Be careful what you wish for!

I’m outside in the driveway with my tools. Do you have the new shocks ready to go?

OK, just kidding this time. But, you never know!

Eric

> On Dec 2, 2024, at 11:31 PM, Mike Miller <mwmiller6@att.net> wrote: > > Hey Eric, > > You want list credit? Why not drop by and change my rear shocks, front shocks, bushings front and rear? I mean we both have vans so it should be straight forward, right? Mine is an 87 sycro by the way. > > Thanks in advance. > > Mike > > PS You're still going straight to SPAM. But then again so do my own emails. > > > > On Monday, December 2, 2024 at 06:32:20 PM PST, Eric Caron <ericcaron96@comcast.net> wrote: > > > Hi listers, > > I changed my shocks on my 85 around 2013. > > I got lots of list help, and I successfully changed both rear and front solo. > > I tried to find those emails in my folder, but must not have been organized back then. > > So, I’d love to have those instructions back for rear and front. > > In the meantime I’ll start with the rear shocks on my 84. > > My questions for the list is any tips or steps in the process? > > I remember jacking up the van, having the wheel at full extension and the wheel supported. I don’t think I removed the wheel. > > Rear was simply unbolt drop out shock, and bolt in the new one then remove tire shim and lower van. What am I forgetting? > > And does anyone know the torque on the upper and lower bolts? > > I plan to do this job solo. > > Any tips appreciated. > > My work on the other van has held up a decade so I want to get more list credit and get another solo vanagon job done. > > Eric Caron > 84 camper.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.