Date:         Tue, 20 Aug 2024 19:06:50 +0000
Reply-To:     Richard Koerner <rjkinpb@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Richard Koerner <rjkinpb@SBCGLOBAL.NET>
Subject:      Re: Bottle Jack vs. Floor Jack
Comments: To: Mark McCulley <mark@markmcculley.com>
In-Reply-To:  <F3A3462A-3814-449A-ADBD-E78DEF85A08A@markmcculley.com>
Content-Type: text/plain; charset=UTF-8

 Yes, you are absolutely correct about the OEM jack, and mine's in perfect shape.  I think I've been watching too many YouTube videos on how to do the tie rod job....and all those guys use either lift or floor jack...but for this job and probably many others, the windup OEM jack and jack stands should work just fine.

    On Tuesday, August 20, 2024 at 11:25:08 AM PDT, Mark McCulley <mark@markmcculley.com> wrote:  
 
 Although easier to position and move around than floor jacks, bottle jacks also require a lever that is several feet long. Also they have a smaller contact area for lifting than floor jacks.

What about the OEM jack? The few times I've used mine it has worked quite well.

-Mark

> On Aug 18, 2024, at 10:31 AM, Richard Koerner <rjkinpb@sbcglobal.net> wrote:
> 
> I recently posted about my bent Tie Rod.  And difficulty for me in small garage to jack up and put on Jack Stands....narrow garage means hard to maneuver and use Floor Jack.  But what about a comparatively small Bottle Jack?  They are powerful, and cheap, and most importantly small and easy to store.  I cannot figure out any good reason why a Bottle Jack would not be a great solution.  Some folks even take them on the road!  Any advice?