Date: Fri, 16 Jun 2017 16:48:38 -0700
Reply-To: rick Duvernay <richard.duvernay@SBCGLOBAL.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: rick Duvernay <richard.duvernay@SBCGLOBAL.NET>
Subject: Re: Rear a/c blower motor resistor
In-Reply-To: <CANEuo0gstjg7Pyib67pKtj88LjdN40hmadie9KjW4NucXrYhFA@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii
Relay worked like a charm. I now have all three speeds with the A/C blower. Thanks Ken!
Sent from my iPhone
> On Jun 12, 2017, at 2:17 PM, kenneth wilford <kenwilfy@GMAIL.COM> wrote:
>
> Sounds good.
> Ken Wilford at vanagain.com
>
> On Jun 12, 2017 5:06 PM, "rick Duvernay" <richard.duvernay@sbcglobal.net>
> wrote:
>
>> Okay. I ordered the relay and will post result. Thanks!
>>
>> Sent from my iPhone
>>
>>> On Jun 12, 2017, at 2:48 PM, kenneth wilford <kenwilfy@GMAIL.COM> wrote:
>>>
>>> There is no other relay like this one on the van. It tries to do about
>>> three or four different things and is usually the root of fan weirdness
>> on
>>> the 86-91 Vanagon AC system. Here is a link to it in our store if you
>> want
>>> to buy a new one.
>>>
>>> https://www.vanagain.com/shop/ac-fan-relay/
>>>
>>> Ken
>>>
>>> On Mon, Jun 12, 2017 at 2:32 PM, rick Duvernay <
>>> richard.duvernay@sbcglobal.net> wrote:
>>>
>>>> Thanks Ken! Is there another similar relay in the van I can swap out to
>>>> test and would a replacement be available through you or another vendor?
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Jun 12, 2017, at 1:25 PM, kenneth wilford <kenwilfy@gmail.com>
>> wrote:
>>>>
>>>> Actually many times this is caused by a relay in the rear air
>> conditioning
>>>> system. It is the tallest of the three relays that are over in the left
>>>> rear pillar that has the number 13 on the top.
>>>>
>>>> Ken Wilford at vanagain.com
>>>>
>>>> On Jun 12, 2017 2:19 PM, "rick Duvernay" <richard.duvernay@sbcglobal.
>> net>
>>>> wrote:
>>>>
>>>>> Folks-
>>>>>
>>>>> I have an 87 gl camper. The rear ac blower motor only operates on high
>>>>> speed. I changed out the front switch on the dash. It made no
>> difference.
>>>>> Is there a resistor in back near the blower motor that I should change?
>>>>> Six months ago I removed the dash and changed out the front blower
>> motor
>>>>> and resistor (after cleaning out the mouse nest). I saved the old
>> resister
>>>>> from the front. Can I use that? I have a Bentley, but I never
>> learned how
>>>>> to read wiring diagrams. Any suggestions would be appreciated.
>>>>>
>>>>> Rick
>>>>>
>>>>> Sent from my iPhone
>>>>
>>>>
>>
>>
|