Date: Tue, 31 Mar 2009 16:34:18 -0230
Reply-To: Joy Hecht <jhecht@ALUM.MIT.EDU>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Joy Hecht <jhecht@ALUM.MIT.EDU>
Subject: Re: Bit o' stopped Rust
In-Reply-To: <01fe01c9b1ab$5b273570$6401a8c0@PROSPERITY>
Content-Type: text/plain; charset=ISO-8859-1
Gee, this even sounds easy enough that I could do it!
Will it work on seam rust behind the fridge that presumably goes all the way
inside? Or is rust in that spot too late to at least deter with this
treatment?
Joy
On Tue, Mar 31, 2009 at 12:19 AM, Scott Daniel - Turbovans <
scottdaniel@turbovans.com> wrote:
> and sorry for the typo's !
> Scott
> ----- Original Message -----
> From: "Rocket J Squirrel" <camping.elliott@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Monday, March 30, 2009 5:15 PM
> Subject: Re: Bit o' Rust
>
>
> Instructions so simple that even a simple squirrel can do it!
>>
>> Thanks, Scott!
>>
>> And Hector -- thanks also for the pointer to that kool kit!
>>
>> --
>> Mike "Rocket J Squirrel" Elliott
>> 84 Westfalia: Mellow Yellow ("The Electrical Banana")
>> 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano
>> Bend, OR
>> KG6RCR
>>
>>
>>
>> On 3/30/2009 4:58 PM Scott Daniel - Turbovans wrote:
>>
>> Rocket's kind of rust spot *perfect* for stopping now, and permanently,
>>> and it's hyper easy to do too.
>>> No kit needed.
>>> 1. clean to bare metal by any means - pick at it with a dental pick,
>>> scrub
>>> it with a small metal brush, etc.
>>>
>>> 2. Spray 'rust stop' on the spot. The stuff that says 'converts rust to
>>> primered metal." Or use brush-on 'rust conerter' liquid from the hardware
>>> store.
>>>
>>> 3. let that cure - for the deluxe treatment, next............... treat
>>> the
>>> spot with self-etching primer paint. If it's too small a spot to spray
>>> with a can, spary some of the paint into the spray can top, then use a
>>> tiny
>>> brush to paint the small spot of treated metal.
>>>
>>> 4. let that paint cure, then touch it up with the correct touch-up paint
>>> in
>>> a small jar, that you get at a automtive paint specialits store, and
>>> using
>>> the paint code that might still be on your van, or get the paint code
>>> online.
>>>
>>> Treated like that, that spot won't even show, and will be rust-free for a
>>> long, long, LONG time.
>>> I do it all the time , it's fun.
>>> Scott
>>> www.turbovans.com
>>>
>>>
>>>> On Mon, Mar 30, 2009 at 2:20 PM, Rocket J Squirrel <
>>>> camping.elliott@gmail.com> wrote:
>>>>
>>>> Mellow Yellow was always a SoCal van, with no sign of rust, even under
>>>>> the
>>>>> floor and behind the reefer. We moved here to Bend, Oregon, which is
>>>>> high
>>>>> desert and pretty arid, too, so I'm not expecting Pacific Northwest or
>>>>> East Coast (USA) grade rust, ever.
>>>>>
>>>>> That said, a couple days ago I spotted a ding above the sliding door
>>>>> handle that looks like it wants attention. I could use a tip or two on
>>>>> a
>>>>> way to tidy this up and halt the rust. I don't have a paint booth or
>>>>> sprayer. I do have chewing gum, though.
>>>>>
>>>>> Please see
>>>>>
>>>>>
>>>>> http://picasaweb.google.com/j.michael.elliott/Vanagon#5319046442995891378
>>>>>
>>>>>
>>>>> --
>>>>> Mike "Rocket J Squirrel" Elliott
>>>>> 84 Westfalia: Mellow Yellow ("The Electrical Banana")
>>>>> 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano
>>>>> Bend, OR
>>>>> KG6RCR
>>>>>
>>>>>
>>>
| 
